6/1/2023 0 Comments Hansa speedo manualTo enable auto close switch dip-switch 6 onĭipswitch 4 – Program Predestrian opening. ![]() When the gate is closed, switch dipswitch 3 off again.Press the Program button again and release – The gate will close.Count the time you want the gate to stay open.Press program button and release – the gate will open and the BIG RED LED will start flashing.Can be programmed from 2 to 255 seconds.When it is done, move dip-switch 2 to the off position.The gate will open and close slowly to find limits, then second time around will go faster.Now press the remote or bridge the 0V and Trigger terminals then release.Press program button – wait for the BIG RED LED to switch on and stay on, then release the program button.Gate closes to the right – dip-switch 1 onĭipswitch 2 – Gate Programming / Setting the Limits. ![]() Gate closes to the left – dip-switch 1 off.NB! NB! Make sure the 12V wire coming from the second battery is connected to terminal. ![]()
0 Comments
Leave a Reply. |